How To Fix Nail Polish Remover Stain On Wood Table

Refinishing is only applicable to real woods, not laminate or particle board.

Acetone is a basic ingredient in most nail smoothen removers, and it will take the terminate off wood as speedily as it will clean your nails. The articulate lacquer coating on many pieces of furniture is similar to nail shine, and acetone will eat through information technology rapidly. Minor exposure may only affect the lacquer coating, but prolonged exposure penetrates all the way through and discolors wood. Once this happens, you can't make clean the stain, but yous tin refinish the surface and restore the wood to its former condition.

Step ane

Spray the area over the stain with an all-purpose cleaner and wipe it dry with a rag. Put a drib fabric on the flooring beneath the wood or motion the item to a well-ventilated work area.

Step 2

Examine the damage. If the damage is modest, colour the area with a wood stain pen and allow to dry. If only the lacquer is affected, apply a sparse coating of spray lacquer over the stain. Allow it to dry according to bundle directions. Repeat if necessary, adding a very thin coat until the sheen matches the surrounding woods.

Step three

Sand the unabridged panel where the stain originated with a piece of fine grit sandpaper until you reach blank wood if the impairment requires more extensive repair. Use an electric sander if the stain is large, you wish to refinish the unabridged piece of woods or if yous desire to change the color of the terminate. Sand only the damaged section if you are able to match the stain color exactly.

Pace 4

Vacuum all sawdust from the wood. Use stain to the entire surface of the wood with a paintbrush or rag. Allow the slice to dry according to bundle directions. Utilise a 2nd glaze and allow it to dry.